Durant Precise Pneumatic Air Feeders

air feeders

MECHANICAL PLUNGER ACTUATION

ELECTRICAL ACTUATION

Precise Pneumatic

Precise Productivity Performers
Durant provides the most cost effective precise pneumatic air feeders for your production requirements. Thirteen models are offered in material widths up to 12", maximum stroke length of 12", and steel thickness .100" maximum. Greater thickness may be used when feeding materials other than steel.

All Durant precise model air feeders include a (3) Year Warranty and Free "0" Ring Repair for the life on the air feeder. No confusing paperwork is required. Simply return the air feeder to Durant and we will repair the feeder at no charge to you.

Durant is not satisfied until you, our customer, is satisfied!

Each Durant precise air feeder is designed and manufactured to insure your feeding production runs smoothly.

Selection
You can feed materials up to 12" wide, 12" stroke length, and material thickness to .250" thick or greater.

Versatility
Durant is built to see you through thick or thin, narrow or wide in metal, plastic or paper. Cost effective production always starts with Durant and ends at the bottom line.

Comparison
Put our Durant precise air feeder units beside any other comparative unit you have heard about. You will find our Durant precise air feeder to be the most Cost Effective, Accurate, Feeding machine available.

Construction
Every model in the line is heavily, quality, manufactured to insure trouble free operation for the life of the Air Feeder.

Installation
Installation is a snap with Durant. Simply insert two bolts through mounting holes (standard air feed spacing), and bolt it to the press table or bolster plate. Next, fix a striker to the press ram and connect the air supply, (75 to 120 PSI). The second the striker is touched by the actuator on the feed, the feed goes into action. The feed length can be altered at any time by simply adjusting the stop on the air feed.

Accuracy
Our sophisticated series of controls enables Durant to achieve accuracy of 0.001" for a couple of reasons. First of all, the feed material is always in the solid grip of either the feed clamp or the holding clamp so it cannot slip or misfeed. Secondly, even if it is maladjusted, the special shock absorbing air cushions at each end of the stroke prevent bounce.

Selection

You can feed materials up to 12" wide, 12" stroke length, and material thickness to .250" thick or greater.

Versatility

Durant is built to see you through thick or thin, narrow or wide in metal, plastic or paper. Cost effective production always starts with Durant and ends at the bottom line.

Comparison

Put our Durant precise air feeder units beside any other comparative unit you have heard about. You will find our Durant precise air feeder to be the most Cost Effective, Accurate, Feeding machine available.

Construction

Every model in the line is heavily, quality, manufactured to insure trouble free operation for the life of the Air Feeder.

Installation

Installation is a snap with Durant. Simply insert two bolts through mounting holes (standard air feed spacing), and bolt it to the press table or bolster plate. Next, fix a striker to the press ram and connect the air supply, (75 to 120 PSI). The second the striker is touched by the actuator on the feed, the feed goes into action. The feed length can be altered at any time by simply adjusting the stop on the air feed.

Accuracy

Our sophisticated series of controls enables Durant to achieve accuracy of 0.001" for a couple of reasons. First of all, the feed material is always in the solid grip of either the feed clamp or the holding clamp so it cannot slip or misfeed. Secondly, even if it is maladjusted, the special shock absorbing air cushions at each end of the stroke prevent bounce.

Are Air Feed Replacement Parts Costing You $$$ and production time! Call Durant. We have the solution to you problems!

Request a Quote